Adding a Fuel Filler on the Gill

I haven't posted in a while. It's hard to have a blog that is about a specific serial-numbered car when you don't have it anymore.  I've decided to keep going on the blog, even though I no longer own #1998. My goal is to keep updating daily for a few weeks to catch up with the current state. As a preview, the Coyote was rebuilt, the new chassis has a cut firewall, and new shocks were installed. I also sold a bunch of parts to keep going with the build, knowing that it will only get me so far. However, I can do a lot with what I currently have.  The new chassis doesn't need body work like the last one did.

The new chassis needs a fuel filler door since I have all late-Ford-era parts, not to mention the safety of the whole thing.

I cut the driver's side gill area, slowly cutting just the minimum. I decided on an aircraft-style filler, black anodized to blend into the gill better.

The new aircraft style fuel filler had screws that were clocked to orient the filler tab back, as this seemed to look the best.

Finished product, but not completely installed. 

The Trade

I traded my car body!

Here's the new, replacement car:

I now own a 1973 Pantera, which is different than my old car but still not too bad. I hauled the old car to Oklahoma City to meet up with Kirk Evans, who traded me for this car. He now owns 1998, which is fine with me. He has the skills to rebuild the entire car, so let him have it!

The new car is in much better shape than 1998. Much better shape is an understatement; the car is mostly original. The rear quarter panel has been replaced on the right side, and some work has been done on the decklid and left rear corner. Kirk added gussets and welded key areas, including welding up the unnecessary holes in the rear wheelhouses. There are a couple wrinkles that I hope to correct, such as in the firewall on the right side as well as in the rear wheelhouse. However, rust is minimal throughout the car and it all seems to be in excellent condition.

I've been working on the Coyote engine, so stay tuned for some updates on the engine progress.

Time to Sell (or Trade?)

On March 21st, I got a call from the body shop. The body guy told me that my car was beyond financial feasibility to fix, and that I should find another car. I was heartbroken, to say the least. I feel cheated in so many ways!

Weber 48 IDF Intake for the 351C

I picked up an Aussiespeed intake for the 351 Cleveland from a guy in Texas that is importing them and selling them on eBay.  I like the fact that he has been importing these and saving everyone on on shipping.  Even though I'm working on a Coyote, I'm also keeping my 351 for originality.  If I decide to go back to stock, then Weber IDF carburetors are the way I'd like to go.  The Aussiespeed intake is a great way to go with Weber carburetors. Unlike the 48 IDF manifold from Hall Pantera, the IDF manifold is a lot shorter.  See the manifold measurements here.  Interesting that they have put my blog as a link there! I put the 40 IDF body I have on the intake to see how it fits.

I also found two brand-new 48 IDF's for a good deal on the internet.  I picked them up and will post when I receive them.  I plan to buy two more, but unless I can find them new, I'll just buy two brand-new from Redline.

I also plan to pick up all of the jetting and linkage needed from Jim Inglese. Jim understands the unique Pantera aspect and builds Weber setups with this intake manifold, and he agreed to sell me the linkage & jetting. My philosophy is that one day, these manifolds, etc. will be gone and I will have missed the boat.

Updates

Suspension was reinstalled. Note stablemate #2511 in the background.

New wheels look small!  The car was put on the frame rack but removed once it was determined that the previous baseline measurements from another car were illegible and needed to be redone.  This is how my car sits today.

I tore the engine down to a bare block and decided to rebuild the entire thing.

Crank removal.  The crank looks great, with minimal wear on each journal.

New Manley H-beam rods with ARP 2000 bolts were purchased.  Ford Racing uses these rods in their Aluminator engines, and I'm confident that they will be fine in my engine.

Mahle forged M142 alloy pistons were purchased 0.010" oversized to fit a machined block.  The Mahle pistons are 11.3:1 and have a 1mm/1mm/2mm ring pack and coated skirts. The M142 alloy is unique in that it combines the best of the 2618 alloys with the low-expansion 4032 alloys.  This means low noise and good service life while coming close to the ductility of 2618 pistons.